Fuel Supply System Components, Replacement Notes

Fuel supply system components, removing and installing

Note:
^ Hose connections are secured with either spring-type or clamp-type clips.
^ Always replace clamp-type clips with screw type clips.
^ Fuel hoses in engine compartment must only be secured with spring-type clips. The use of clamp or screw-type clips is not permissible.
^ Assembly tool VAS5024 or hose clip pliers VAG1921 are recommended for installing spring-type clips.

- Observe safety precautions.
- Observe rules for cleanliness.

Removing and installing fuel tank with its attachments and fuel filter, Refer to Fuel Tank, Service and Repair, Procedures, Fuel Tank With Attachments and Fuel Filter, Removing and Installing.
Observe crash fuel shut-off, Refer to Inertia Fuel Shutoff Switch, Service and Repair.
Electronic Power Control (EPC) system (E-Gas), checking, Refer to Powertrain Management, Accelerator Pedal Positions Sensor, Testing and Inspection.
Servicing parts of the Evaporative Emission (EVAP) system, Refer to Evaporative Emissions, Service and Repair, Procedures, Evaporative Emission (EVAP) System Components, Servicing.