Fuel Supply System Components, Removing and Installing

Fuel Supply System Components, Removing And Installing

NOTE:
- Hose connections are secured with screw-type clamps, spring-type clamps or tensioning clamps.
- Always replace tensioning clamps with spring-type clamps or screw-type clamps.
- Fuel hoses at engine must only be secured with spring-type clamps. The use of clamping collars or screw clamps is not permitted.







- VAS5024A spring clip installation tool is recommended for installing spring-type clips.

Observe safety precautions.
Observe rules for cleanliness.
Removing and installing fuel tank with attachments and fuel filter.
Electronic engine power control (E-Gas), checking.
Removing and installing parts of the EVAP canister system.