Relay Panel and 13-Position Relay Panel

Relay panel and 13-position relay panel, removing and installing


CAUTION!
Before working on the electrical system:
- Determine the correct coding for the antitheft radio.
- Switch ignition off
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of the anti-theft radio.


Removing
- Remove lower instrument panel trim on driver's side.







- Remove both securing screws -C- (2 Nm) and loosen all bolted connections -D- as necessary.
- Remove relay panel -B- and relay panel -A- downward.


Installing
- Install in reverse order.