Tail Light Bulb: Service and Repair

Taillight bulbs, replacing

The procedure for removing and installing turn signal light bulbs is the same as that for brake light and taillight bulbs.

Only the procedure for brake light and taillight bulbs is described here.

Removing
- Remove rear light.







- Turn bulb holder in direction shown (arrow) and remove from housing.
- Remove bulb from holder.

Installing


CAUTION!
Do not touch the glass portion of the bulb with bare hands. The moisture and/or grease from fingers that evaporates on the bulb during operation, can cause the glass to cloud over.


- Install in reverse order.
- When installing, make sure bulb holder engages in housing by turning in opposite direction shown (arrow).