Part - III

Turbocharger With Attachments, Removing And Installing

Vehicles with engine code AWP, AWV







1 Pressure regulator valve
- For crankcase ventilation
2 to crankcase breather valve
3 Deceleration shut-off valve
4 Connection hose
- To Recirculating valve for turbocharger -N249-*
5 Connection hose
- from deceleration shut-off valve to upper air guide pipe
6 From air filter
7 upper air guide pipe
- note installation position of heat shield mat
- Vehicles with engine code AWP, AWV with quick-release connection (with O-ring and retaining clip)
8 Bracket
9 40 Nm
10 25 Nm
11 to connection hose for lower connection sleeve/charge air cooler
12 O-ring
13 Retaining clip
- Check for secure fitting
14 10 Nm
15 from turbocharger exhaust tube
16 Connection hose
17 Connection hose
- to vacuum diaphragm for boost pressure regulator valve
18 Retaining clip
- Check for secure fitting
19 O-ring
20 Intake hose
- to intake tube of turbocharger
21 Connection hose
- To suction jet pump
22 Wastegate Bypass Regulator Valve -N75-
- Valve is activated (pulsed) by the Engine Control Module (ECM)
- Closed when no voltage present, limits charge pressure