Front, Axle Removing and Installing

Removing and installing speed sensor on front axle
Removing
- Raise vehicle.





- Disconnect speed sensor and speed sensor wiring connector -1-.
- Remove bolt -2- from wheel bearing housing.
- Disconnect ABS speed sensor from wheel bearing housing.

Installing
- Before inserting speed sensor, clean hole inner surface and coat speed sensor with solid lubricant G 000 650.
- Insert speed sensor into hole in wheel bearing housing and tighten bolt to 8 Nm (71 inch lbs.).
- Connect speed sensor to speed sensor wiring.
- Turn wheels fully to left and right lock and check clearance of speed sensor wiring.