Rear Axle, Removing and Installing

ABS system components on rear axle, removing and installing
1. ABS speed sensor
^ Before inserting sensor, clean mounting hole inner surface and coat with lubricant G 000 650
2. Hex socket head bolt, 8 Nm (71 inch lbs.)
3. Stub axle
4. Splash plate
5. Hex bolt, 60 Nm (44 ft. lbs.)
^ With dished spring
6. Phillips-head screw
7. Brake disc
8. Cap
9. Self-locking 12-point nut, 175 Nm (129 ft. lbs.)
^ Replace each time after removing
10. Wheel hub with wheel bearing and rotor
11. Axle beam