Front Axle, Removing and Installing

ABS system components on front axle, removing and installing

Note: Removing and installing ABS system components is identical for FS 111 and EN 3 brake calipers.

1. ABS speed sensor
^ Before inserting sensor, clean mounting hole inner surface and coat with lubricant G 000 650
2. Wheel bearing housing
3. Hex socket head bolt, 8 Nm (71 inch lbs.)
4. Splash plate
5. Hex bolt, 10 Nm (88 inch lbs.)
6. Wheel bearing
7. Phillips-head screw
8. Brake disc
9. Wheel hub with rotor
10. Circlip