Drive For Sunroof, Adjusting (Setting "0" Position)

Drive For Sunroof, Adjusting (Setting "0" Position)

There may be a requirement to adjust the "0" position if the drive was removed when not in "0" position or the sunroof was closed using the emergency key.

Drive removed but still connected electrically.

- Select "tilt roof with preselection automatic rotary switch.
- Select "close roof with preselection automatic rotary switch.
- Select "open roof with preselection automatic rotary switch.
- Select "close roof with preselection automatic rotary switch.
- Install drive in this position ("0" position) with sunroof closed.