Large Flap Base, Removing and Installing

Large Flap Base, Removing And Installing

CAUTION: There is a danger of damaging painted side trim parts.

NOTE: Removal and installation is described for left side of vehicle. The same instructions apply for removal and installation for the right-hand side.

Removing
- Remove side trim.
- Remove flap positioning module.
- Remove push rod.
- Remove bolts - 1 - (3 Nm).







- Fold back large flap base away from main frame of flap positioning module.

Installing
- Installation is performed in the reverse order of removal.
- Adjust gap dimensions of large flap base.