Flap Servomotor, Removal and Installation

Flap Servomotor, Removing And Installing

For vehicles with electric-/hydraulic convertible without large flap base and flap servomotor from 06.04 to 11.04, flap servomotor is installed on right side of luggage compartment, meanwhile control head for convertible was modified for this function.

Removing
- Remove right luggage compartment trim.







- Remove flap servomotor connections - 1 - - arrow -.
- Loosen support nuts - 2 -.
- Remove flap servomotor with support - 3 -.

NOTE: If present, also secure parking aid control module.

- Remove bolts - 4 - from support if necessary.

Installing
- Installation is performed in the reverse order of removal.