Tunnel Support Cover, Removing and Installing

Tunnel Support Cover, Removing And Installing

Removing
- Remove center console
- Vehicles --> 01.01.
- Vehicles 02.01 --> 04.03.
- Vehicles 05.03 --> 06.05 and convertible.
- Vehicles 07.05.







- Remove bolt - 1 -.
- Remove clip - 2 -.







- Remove bolt - 1 -.
- Pull tunnel support cover - 2 - out toward rear - arrow -.
- If necessary, disconnect harness connector for power outlet.

Installing
- Installation is performed in the reverse order of removal.