Glove Compartment, Removing and Installing

Glove Compartment, Removing And Installing

Removing







- Remove right side instrument panel cover - 1 - from instrument panel at rear - 3 - and pull off from instrument panel toward rear.
- Remove bolts - 2 -.







- Pry off cover caps - 1 - and remove bolts - 2 -.
- Remove switch mount - 3 - from bracket.







- Remove six bolts - arrows - (bolt in center of vehicle under cover cap).
- Remove glove compartment - 1 -.
- Disconnect harness connector for glove compartment lamp and, if necessary, disconnect key switch for airbag.

Installing
- Installation is performed in the reverse order of removal.