Fuel Door Release Actuator: Service and Repair

Tank Lid Release Motor, Removing And Installing

NOTE: The tank lid release motor is located on bracket in right wheelhousing.

Removing
- Remove right luggage compartment side trim:
- Sedan
- Convertible







- Disconnect connector - 1 - from motor - 2 -.
- Unhook cable on bracket - arrow -.
- Loosen bolts - 3 -, remove motor - 2 - from bracket and unhook cable on motor.

Installing
Installation is performed in the reverse order of removal.
- Check function of tank lid remote release motor before installing trim.