General Information

Radio, removing and installing

General information

CAUTION!
Before beginning repairs on the electrical system: Obtain the anti-theft radio security code. Switch off all electrical consumers. Switch ignition off and remove ignition key. Disconnect negative ( - ) battery terminal. When disconnecting and reconnecting battery terminals, observe all applicable notes and torque specifications, as well as instructions on performing OBD program and electrical system function checks as specified

Notes: If radio is exchanged or replaced
Anti-theft security code for new radio must be entered before use Page 91-25 . Be sure to advise customer of new security code.
Confirm radio coding for sound system functions using On Board Diagnostic program function 07: "Code Control Module"
Radio sound system coding must be performed to account for presence of CD changer (if installed), Monsoon system (where applicable) and interior sound field differences between models.