General

NOTE:
- All the possible DTCs which are recognized by the Transmission Control Module -J217- and displayed on the VAG 1551 Scan Tool with the printer switched ON, are listed below grouped according to the DTC number.
- If malfunctions occur only occasionally or if the DTC memory was not erased after correcting the malfunctions, these will be displayed as "sporadic malfunctions" for a stipulated period of time. See TCM -J217- malfunction recognition.
- If components are indicated as being faulty when the DTC memory is checked additionally test the wiring to the components for short and open circuits according to the wiring diagram. See Electrical Wiring Diagrams and Component Locations.
- The DTC and (with 7.0 program card) the type of malfunction in numbers is printed out in the "rapid data transfer" mode only when the VAG 1557 printer is switched ON.
Example: DTC (5-position) 65535 XYZ (type of DTC, explained in text below component name).