Std-Output (DTM) w/Airbag Module, J234, VW7 w/o Auto Rollover

Standard-Output Diagnostic Test Mode (DTM) for vehicles with Airbag Control Module -J234- version VW7 without Automatic Rollover Supports(TM) activation (convertible)

- Connecting V.A.G 1551 or VAS 5051. Scan Tool, Connecting
- Switch interior light switch to "door contact".
- Start engine (gasoline engines only).
- Switch central locking to "locked" (operate interior switch via the opened driver's door window).
- Initiate On Board Diagnosis (OBD). Introducing On Board Diagnosis (OBD) For Airbag

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -3-.

Indicated on display:

Rapid data transfer Q
03-Final control diagnosis

- Confirm entry with -Q- button.

NOTE:
- During the following diagnosis steps only the vehicle diagnostic, testing and information system -VAS 5051 will show a complete text display.
- The display output is shown uncompletely on the scan tool V.A.G 1551.
- The values indicated on display have the following meaning:

Indicated on display:

Final control diagnosis ->
01659 /Literature

- 01659 Belt tensioner crash limit is exceeded
- Press -> button twice.

Indicated on display:

Final control diagnosis ->
01660 /Literature

- 01660 US-airbag crash limit exceeded
- Press -> button twice.

Indicated on display:

Final control diagnosis ->
01661 /Literature

- 01661 RDW (rest of the world) airbag crash limit exceeded
- Press -> button

The engine (gasoline engine only) is switched off, the central locking must switch to "unlock" and the interior lights must switch "on".

Indicated on display:

Final control diagnosis ->
END

- -> Press button