Erase DTC Memory (Function 05)

DTC Memory, Erasing (Function 05)

- Press keys 0 and 5 for the function "Erase DTC Memory" and confirm entry with Q key.

Indicated on display:


Rapid data transfer ->
DTC memory is erased!


NOTE: If the ignition is switched off between "Check DTC Memory" and "Erase DTC Memory" the DTC memory will not be erased.


- Press -> key.

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press keys 0 and 6 for the function "End Output" and confirm entry with the Q key.
- Repair malfunctions printed out using DTC table:
SAE P0 codes P Code Charts
SAE P1 codes P Code Charts
- Re-generate readiness code:

Engine code AWP, Monitors, Trips, Drive Cycles and Readiness Codes