Heating and A/C Cables, at HVAC Case

Temperature And Central Flap Cables, Removing And Installing


NOTE:
- Cable sleeve ends are color coded.
- When Installing secure cable to heated/evaporator unit first.
- Check cables before installing and replace binding or damaged cables.


Removing
- Remove heating and A/C controls
- Remove instrument panel
- Remove footwell air outlet.
- Disconnect cable for central flap or temperature flap on heater/evaporator unit.

Installing







Illustration shows right-hand drive version.
1 - Central flap cable, sleeve marking: Black
2 - Temperature flap cable, sleeve marking: Red
3 - When attaching inner cable note: Do not press end of wire (arrow) against lever.