Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)

Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)


NOTE: After erasing the DTC memory its contents will automatically be indicated. If the DTC memory cannot be erased, check DTC memory again and repair malfunctions.


Requirements
- DTC memory checked. Reading and Displaying Trouble Codes
- All malfunctions repaired

After DTC memory has been successfully checked:

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display


Rapid data transfer Q
05 - Erase DTC Memory


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer ->
DTC Memory is erased


DTC memory is now erased.
- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTE:
- If this appears on the display, the test sequence is faulty.


Warning!
DTC Memory is not interrogated


- If this appears on the display, the test sequence is faulty.


Rapid data transfer ->
DTC Memory is not interrogated


- Follow the test sequence exactly: First check DTC memory, if necessary repair malfunctions, then erase DTC memory.