Stabilizer Bushing: Service and Repair

Modified mounting for stabilizer bar

Affected vehicles:

^ All vehicles with four-wheel drive

1. Nut, 90 Nm (66.4 ft. lbs.)
2. Control arm
3. Hex bolt. 45 Nm (33 ft. lbs.)
4. Bracket
5. Nuts 90 Nm (66.4 ft. lbs.)
6. Anti-roll bar
7. Connecting link

A. Upper threaded pin
- Fit ball joint with long thread -A-, at top on spring plate.

B. Lower threaded pin
- Fit ball joint with short thread -B-, at bottom on anti-roll bar.