Rear Window Motor, Removing And Installing

Rear Wiper Motor, Removing

Wiper Arm, Removing


NOTE: Before removing wiper arm, ensure that wiper motor is in park position. This ensures proper wiper arm/blade park position when reinstalling.







- Pry off wiper arm cap -arrow- with a screwdriver.
- Loosen M8 nut -arrow-, but do not remove completely.
- Lift wiper arm lightly until it releases from tapered shaft.
- Remove nut completely and remove wiper arm.
- Remove inner trim from rear hatch

Rear wiper motor, removing







- Disconnect electrical connector -1 - from wiper motor.
- Pull off hose -2- to washer jets.
- Remove M10 hex bolts -arrows- and remove wiper motor.

Rear wiper motor, installing







When installing the wiper motor, ensure rear window seal seating as illustrated.
Installation is in reverse order of removal.