Front/Windshield Wiper Arms

Wiper Arms, Removing


NOTE:
- The wiper arms and windshield cowl panel must be removed in order to remove the wiper assembly (consisting of wiper motor, frame, wiper shafts and linkages).
- The housing for the control modules (in left side of plenum) must also be released and pushed forwards.
- Before removing wiper arms, ensure that wiper motor is in park position. This ensures proper wiper arm/blade park position when reinstalling.







- Pry off wiper arm cap -arrow- with a screwdriver.







- Loosen M8 nuts -arrows-, but do not remove completely.
- Lift wiper arms lightly until they release from tapered shaft.
- Remove nut completely and remove wiper arms.