Transmission With Hydraulic Control E17

Sensor for transmission RPM -G182, replacing
Removing
- Remove valve body.





- Turn valve body over, and unplug connector from sensor for transmission RPM -1-.





- Unscrew bolts and remove sensor for transmission RPM -1- from valve body.

Installing
Installation position:
The side of the sensor with the plug contacts faces toward the center of the valve body.





- Install sensor for transmission RPM -1- with spacer-2- (height: 20 mm) and tighten to prescribed toque.





- Fit connector to sensor for transmission RPM -1 -.
- Install valve body.
- Fill with ATF.