Vehicles W/O HID Headlights

Low beam bulb, replacing


CAUTION!
Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.


- Remove small cover cap from rear of headlight housing.







- Turn socket (with connector) -1- counterclockwise -arrow- and pull out of headlight housing.







- Pull bulb -1- out of socket -2- in direction of -arrow-.
- Replace bulb.
- Reinstall socket (with connector) into headlight housing. Lock socket in place by turning clockwise.
- Reinstall cover cap.
- Check headlight (bulb) function.

High beam bulb, replacing


CAUTION!
Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.


- Remove large cover cap from rear of headlight housing.







- Turn socket (with connector) -1- counterclockwise -arrow- and pull out of headlight housing.







- Pull bulb -1- out of socket -2- in direction of -arrow-.
- Replace bulb.
- Reinstall socket (with connector) into headlight housing. Lock socket in place by turning clockwise.
- Reinstall cover cap.
- Check headlight (bulb) function.