With Manufacturer Scan Tool

Diagnostic Trouble Code (DTC) memory, erasing (function 05)


NOTE: Erasing DTC memory (function 05) is only possible after checking DTC memory (function 02). If DTC memory cannot be erased, check DTC memory again and rectify indicated malfunctions.


Prerequisites
- Check DTC memory. Displaying and Reading Trouble codes
- All malfunctions repaired.

After checking DTC memory:

Readout in display:


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5- to select function 05, "Erase DTC memory".

Readout in display:


Rapid data transfer Q
05 Erase DTC memory


- Press -Q- button to confirm input.

Indicated on display: (DTC Memory is erased)


Rapid data transfer
DTC memory is erased!


- Press -> button.

Indicated on display (select function):


Rapid data transfer HELP
Select function XX


- End output (function 06). End Output (Function 06)


NOTE: If this appears in the display, the test sequence is faulty.


Warning!
DTC memory was not checked


If this appears in the display, the test sequence is faulty.


Rapid data transfer
DTC memory was not checked


Adhere exactly to test sequence: First check DTC memory, repair malfunctions if necessary, then erase.