Instrument Panel Bulb: Service and Repair

Instrument Cluster Bulbs, Replacing (Green Illumination Only)


CAUTION!
- Obtain the anti-theft radio security code.
- Switch the ignition off
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio.


NOTE:
- Do not disassemble instrument cluster.
- Troubleshooting procedures and wiring diagrams







1 - 32 pin multi-connector
- Green
- Connector assignments Up To 08.99
- Connector assignments From 08.99
2 - 20 pin multi-connector
- Where applicable
- Red
- Connector assignments Up To 08.99
- Connector assignments From 08.99
3 - Bulb with holder (headlight high beam indicator light -K1-)
- 12 V / 1.12 W
4 - Bulb with holder
Malfunction Indicator Lamp (MIL)
- 12 V / 1.12 W
5 - Bulb with holder (rear hatch/trunk lid ajar warning lamp -K102-)
- 12 V / 1.12 W
6 - 32 pin multi-connector
- Blue
- Connector assignments Up To 08.99
- Connector assignments From 08.99