Hood Insulator / Pad: Service and Repair

Insulation, Removing And Installing

Note:
- Removing and installing insulation for W8 is derived accordingly from this.
- Insulation for W8 is secured by 17 retaining clips.

Removing







- Pry retaining clips - 3 - (15 pieces) and inserted clips - 2 - (2 pieces) using Pry lever 80-200 out of insulation - 1 -.
- Remove insulation - 1 - from hood.

Installing







- Place insulation - 1 - into hood cut-out.
- Engage retaining clips - 3 - (Qty. 15) and inserted clips - 2 - (Qty. 2) into insulation - 1 -.

- When installing insulation - 1 -, make sure that retaining clips - 3 - are aligned with short side to outer contour.