Right Luggage Compartment Side Trim, Removing and Installing (Golf Wagon/Jetta Wagon)

Right Luggage Compartment Side Trim, Removing And Installing (Golf Wagon/Jetta Wagon)

NOTE: Luggage compartment side trim at left contains a 12 V socket and a luggage compartment light. corresponding wiring harnesses must be disconnected before removing trim.

Removing
- Fold right seat cushion forward.
- Remove right seat backrest.
- Remove wheel housing trim.
- Remove lock carrier cover at rear.
- Remove bolts - 1 - and remove tie-down - 2 -.
- Remove bolts - 3 - and remove tie-down - 4 -.
- Remove bolt - 5 -.







- Loosen luggage compartment trim - 6 - and disconnect any harness connectors for light and 12 V socket.







Installing
Installation is reverse of removal.

NOTE: Before installing, check clips and clamps for damage and replace if necessary.