Upper C-Pillar Trim, Removing and Installing (Golf Wagon/Jetta Wagon Without Side Curtain Protection)

Upper C-pillar Trim, Removing And Installing (Golf Wagon/Jetta Wagon Without Side Curtain Protection)

NOTE: Removal and installation is described for right side of vehicle. same instructions apply for removal and installation for left-hand side.

Removing
- Remove cap - 1 -.
- Remove bolt - 2 - and remove belt relay - 3 -.
- Remove seal - 4 - in area of trim.







- Remove trim - 5 - from C-pillar.







Installing
- Installation is reverse of removal.