Upper C-Pillar Trim, Removing and Installing (Golf Wagon/Jetta Wagon With Side Curtain Protection)

Upper C-pillar Trim, Removing And Installing (Golf Wagon/Jetta Wagon With Side Curtain Protection 05.01 -->)

NOTE: Removal and installation is described for right side of vehicle. same instructions apply for removal and installation for left-hand side.

Removing
- Pry off cap - 1 -.
- Remove bolt - 2 - (40 Nm) and remove belt relay - 3 -.
- Unclip emblem, airbag - 4 - using a small screwdriver.
- Remove bolt - 5 - (2 Nm).







- Unclip trim - 6 - from C-pillar.







Installing
Installation is reverse of removal.

NOTE:
- Before installing trim, check clips - 7 - and clip - 8 - for damage and replace if necessary.
- Steel clips and C-pillar trim parts can no longer be ordered separately for vehicles with side curtain protection - parts catalog.