Rear Top Tether

Rear Top Tether, Jetta Sedan







Installation:

1 - Cap
- Qty. 1
2 - Hex bolt
- Qty. 1
- 23 Nm
3 - Bracket
- Qty. 1
4 - Spacer
- Qty. 1
5 - Parcel shelf
- Holes for anchorage points are pre-drilled (3 locations) and covered by parcel shelf
- Locate predrilled holes and cut material off in circular shape to allow installation of anchorage components
6 - Parcel shelf sheet metal
- With predrilled holes for anchorage points
7 - Washer nut
- Qty. 1
- Install from below
8 - Rivet
- Two for washer nut -7-
- Install from below







Illustration shows rear top tether strap attached to anchor in a sedan model.