Serpentine Belt

Ribbed belt, removing (engine code ALH only)







NOTE:
- Engine codes AEG and AFP ribbed belt, removing See Repair Manual, Engine Mechanical.
- Before removing ribbed belt, mark the direction of rotation on the belt. When installing the belt be sure that it is correctly seated on the pulley.


- Apply flat ring wrench (16 mm) to hexagon of belt tensioner.
- Move wrench in direction of arrow.
- Remove ribbed belt.

Idler pulley, removing and installing







1 - Cover cap
2 - 25 Nm (18 ft lb)
3 - Idler roller

Fig. 3 Ribbed belt routing (engine code ALH only)







NOTE: When installing the belt, be sure that it is correctly seated on the pulley.