With Manufacturer Scan Tool

Erase DTC Memory

Test requirements :
- DTCs are rectified
- DTC memory checked again

Indicated on display


Rapid data transfer HELP
Select function XX


- Press keys -0- and -5- (the function "Erase DTC Memory" is entered with 05).

Indicated on display


Rapid data transfer Q
05 - Erase DTC Memory


- Confirm with -Q- key.

Indicated on display


Rapid data transfer ->
DTC Memory is erased!


- Press -> key.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTE:
- If this appears in the display, the test sequence is inoperative.


WARNING!
DTC Memory was not checked


- Adhere strictly to test sequence; first check DTC memory, then erase memory.