Engine Accessory Bracket: Service and Repair

Special tools required:
- Torque wrench (5 - 50 Nm)

NOTES:
- The compressor bracket and related components can be removed and installed without discharging the refrigerant circuit.
- Ribbed belt removing: Service and Repair





1 - Belt tensioner
2 - Generator
3 - Bracket for generator, compressor and power steering pump
- Removing:
- First remove generator, compressor and power steering pump.
- Suspend compressor with wire on body.
- Remove bracket from engine block.
4 - Allen bolt M10x55
- Qty. 4
- 50 Nm (37 ft lb)
5 - Power steering pump
6 - Compressor
- With A/C clutch -N25-
7 - Bolt M10x112
- 45 Nm (33 ft lb)