Rear Lid Trim, Removing and Installing (Jetta)

Rear Lid Trim, Removing And Installing (Jetta)

Removing







- Open locking mechanism - 2 -.
- Fold bracket - 1 - upward and remove warning triangle - 3 -.







- Remove bolts - arrows -.
- Slide bracket - 1 - upward and remove.
- Remove bolts - 1 - (Qty. 13).







- Loosen trim - 2 - in area of grip recess out of lid and remove.







Installing
- Check nuts - 3 -, replace if necessary and insert into holes of lid.
- Place trim - 2 - in installation position and bolt firmly.
- Insert bracket for warning triangle and bolt firmly.
- Insert warning triangle into bracket.







- Fold bracket closed and bolt down locking mechanism.