Muffler System With Mountings, Component Overview

Muffler System With Mountings Components Overview






1. - From Catalyst
2. - Double clamp
3. - 25 Nm (18 ft. lb.)
4. - Mounting
5. - Center muffler
6. - Seperation point
- For repairing
- Exhaust pipe is marked with three indentations around circumference
- Center and rear mufflers are installed as a single welded component in production. Center and rear mufflers can be obtained individually with double clamp as spare parts
- Saw through connecting pipe (at right angles) at seperating point using body saw.
7. - Mounting
8. - Bracket
9. - Rear muffler
10. - Mounting
- With retaining ring
11. - 20 Nm (15 ft. lb.)
12. - Tunnel bridge
13. - 40 Nm (30 ft. lb.)
14. - Washer