Engine Accessory Bracket: Service and Repair

Special tools required:
- Torque wrench (5 - 50 Nm)

NOTES:
- The compressor bracket and related components can be removed and installed without discharging the refrigerant circuit.
- Ribbed belt, removing Service and Repair





1 - Bracket for injection pump, generator, compressor and power steering pump
- Removing:
- First remove injection pump, generator, compressor and power steering pump
- Remove compressor from bracket and secure to body with wire.
- Remove bracket from engine block.
2 - Injection pump
3 - Power steering pump
4 - Bolt
- M10X65
- 45 Nm (33 ft lb)
- Qty.: 4
5 - Bolt
- M10X45
- 45 Nm (33 ft lb)
- Qty.: 2
6 - Compressor
- With A/C clutch -N25-
7 - Bolt
- M10X112
- 45 Nm (33 ft lb)
- Qty. 2
8 - Idler pulley
9 - Generator
10 - Ribbed belt