Rear Outer Seatbelts, Removing and Installing

Rear Outer Seatbelts, Removing And Installing

NOTE: Removal and installation is described for right side of vehicle. same instructions apply for removal and installation for left-hand side.

Removing
- Pull seat cushions upward and fold m toward front.
- Release seat cushion backrest and fold it toward front.
- Remove support, luggage compartment cover.
- Remove luggage compartment trim in area of automatic belt retractors.
- Remove bolt - 11 - (40 Nm) and remove lower belt end fitting - 10 -.
- Remove noise insulator - 3 - from automatic belt retractor - 1 -.
- Remove screw - 2 - (40 Nm) and remove automatic belt retractor - 1 - from chassis.
- Clip on cover cap - 6 - for belt relay - 8 -.







- Remove screw - 7 - (40 Nm) and remove belt relay - 8 - off belt height adjuster - 4 -.







Installing
- Installation is reverse of removal.