Front Seatbelt, Assembly Overview (With Belt Tensioner)

Front Seatbelt, Assembly Overview (with Belt Tensioner)

CAUTION: Before beginning disassembly, straightening or or body repair work, belt tensioning units must be removed.







1 - Seatbelt height adjuster
- To remove height adjustment mechanism, upper B-pillar trim must be removed first

2 - Cylinder bolt
- 23 Nm

3 - Belt relay
4 - Concealment cap
5 - Hex bolt
- 40 Nm

6 - Belt latch
7 - Connector
- Only with electrical belt tensioners

8 - Seatbelt with belt tensioner
9 - Hex bolt
- 40 Nm

10 - Hex bolt
- 40 Nm

11 - Screws
- Qty. 2, 1.5 Nm

12 - Belt guide