Center Seat Belt Reel, Removing

Center Seat Belt Reel, Removing
- Fold seat backrest forward.





- Unhook seat belt fitting -1- from lower mounting -2-.
- Remove rear seat backrest.





- Pry off cover cap -1- and seat belt guide -2-.
- Remove head restraint guides.
- Release cover and padding for seat backrest.





- Remove bolts -1- (Qty. 4) (40 Nm or 30 ft lb) and take seat belt mounting -2- off backrest frame -3-.
- Remove nut -5- (40 Nm or 30 ft lb) and unhook belt inertia reel -4- from backrest frame -3-.
- Guide seat belt with seat belt tongue downwards from backrest frame -3-

NOTE: The belt reel must be held in the installed position to unreel the seat belt.