High Pressure Service Valve

High Pressure Service Valve, Removing


NOTES: Before carrying out any work on the A/C refrigerant system, refer to A/C refrigerant system safety measures. [1][2]Service Precautions

High Pressure Service Valve, Removing





- Discharge refrigerant system before replacing valve -3-. Only use Kent Moore ACR4 or equivalent.

NOTE: Protect all opened components against contamination of dirt and moisture with suitable plastic caps.

1 - Base with inside thread
2 - O-ring
Always replace
10.8 mm; 1.8 mm
3 - Service valve with groove and inside thread for cap.
4 - O-ring
Always replace
10.8 mm; 1.8 mm
5 - Cap