Front Seat Backrest Heating Element, Removing and Installing

Front Seat Backrest Heating Element, Removing And Installing

CAUTION:
- Do not install normal seat heater elements (for fabric seat covers) in vehicles with leather seat covers.
- There is a danger seat heater may overheat.

Removing
- Remove seat.
- Remove backrest.
- Remove backrest cover.
- Disconnect harness connector - 5 -.







- Guide cable - 1 - through opening - 2 - in center part of cushion - 3 - and remove heating element - 4 -.







Installing







- Installation is reverse of removal.

NOTE: When installing material - 1 - of heater element, it must be connected with backrest cover and backrest frame - 2 - in groove (depression) utilizing two sided tape. heater element must be installed over head rest adjuster guide holes - 3 - and secured with head rest guide.