Release Lever, Interior

Removing
- Pull release lever -1- approx. 2 cm (0.8 in.).
- Insert small screwdriver into gap between lever -1- and clip -2-.
- Let go of lever and pry clip off (clip falls behind trim).
- Unclip trim -3- from bracket at center and from sill panel.

Installing
- Clip trim -3- into sill trim first.
- Press upper clip into lever bracket.
- Push clip -2- into release lever.
- Press release lever onto mounting in lever bracket.
- Before closing hood perform a functional check of release lever and bowden cable.