Coast Clutch

1. Rollers
^ Installing refer to Fig. 1
2. Springs
^ Installing refer to Fig. 1
3. Cage
^ Installing refer to Fig. 2
^ Securing refer to Fig. 3
4. Outer ring
5. Piston
^ Seals are vulcanized to piston
^ Moisten seals with ATF before installing
^ Turn piston slightly when installing
^ Installed position refer to Fig. 4





Fig. 1 Rollers and springs, installing
- Insert springs so spring (arrow) engages in cage.





Fig. 2 Cage with springs and rollers, inserting
- Install with large lugs (arrow) facing up.





Fig. 3 Cage, securing
- Secure cage by turning in direction of arrow to stop.





Fig. 4 Piston, installed position
- Insert piston -A- as shown.