Belt Inertia Reel With Tensioner Unit, Removing and Installing

Belt Inertia Reel With Tensioner Unit, Removing And Installing

Removing

CAUTION: Always follow sequence for removing and installing seatbelt.

- Remove side trim.
- Removing B-pillar trim.
- Remove anchor rail.
- Loosen lock nut - 10 - so that tensioner unit - 9 - removed and made safe. Remove belt guide.
- Remove bolt - 2 - (40 Nm).
- Remove inertia reel - 1 -.







- Pull tensioner unit - 9 - out of cable channel - 8 -.







Installing
Installation is performed in reverse order, which must be followed.