Preparing (Old) Undamaged Window For Glazing

Preparing (old) Undamaged Window For Glazing







NOTE: When re-using an undamaged window glass, cut back adhesive sealant residue - 1 - using an electric cutter and blade V.A.G 1561/10 with stop roller of 1-2 mm. Do not damage pre-coating and lip with spacer - 2 -.







- Do not damage spacer -1 - and ceramic coating - 2 -.

CAUTION: Do not prime, activate or use a cleaning solution on adhesive surfaces. Keep adhesive surface free of dirt and grease.

NOTE: If bonding is not performed immediately after cutting back residual bead, it must be activated.