IV-Planet Carrier and Transmission Housing

IV-Planet Carrier And Transmission Housing With Input Gear And Cover
Refer to Overview.
Disassembling planetary transmission.
Assembling. Disassembling and Assembling





1. Planet carrier
^ Adjusting. Refer to Adjustments.
2. O-ring
^ Always replace
^ Insert in planet carrier
3. Axle needle bearing washer
4. Axle needle bearing
5. Axially needle bearing washer
^ Install smooth side in input gear
6. Transmission housing with input gear installed
7. Input gear
^ Do not remove to disassemble planetary transmission
^ Removing and installing input gear or axial needle bearing for planet carrier refer to Differential, Automatic Transaxle; Service and Repair.
8. Planet carrier shim
^ Determining thickness, Planet carrier, adjusting. Refer to Adjustments.
9. Washer
10. Bolt
^ 30 Nm (22 ft. lbs.)
^ For small input shaft
11. Spacer bushing
^ Install in gasket (qty. 7)
12. Gasket
^ Always replace
13. Cover
14. Bolt
^ 8 Nm (71 inch lbs.)