Side Trim, Removing and Installing

Side Trim, Removing And Installing

Removing
- Open convertible top as far as shown - in illustration -.
- Remove ball pin - 1 - and screw - 2 -.







- Remove cover - 3 - and lower convertible top completely.
- Remove rear seatbench.
- Remove backrest lower section.







- Remove bolts - 1 -, remove backrest upper section - 2 - upward and place on opened convertible top.







- Remove clip - 1 - and pull door sill molding - 2 - upward out of clamps - 3 -.
- Remove window crank
- Remove clip - 1 - and pry out clips - 2 -.







- Remove screws - 3 - and remove side trim.

Installing
- Installation is reverse order of removal.