Notes

Electrical test table
Notes on electrical test table
- The socket number designations on the VAG 1598 test box are identical to the terminal designations on the ABS control module -J104-.
- If the measured values deviate from the specifications, repair the malfunction as described in the right-hand column of the table.
- Use connector test kit VW1594 for continuity checks (bridging).
- If the measured values deviate only slightly from the specifications, clean sockets and connectors for tester and adapter cables (with contact spray G 000 700 04) and repeat the test.
- Before replacing components, check wiring and connections and also, particularly for specifications of less than 10 Ohms, repeat the resistance test on the component.